2-Wire RS485 Surge Protector (Industrial / Passive) – CommFront
4.6 (521) · € 25.50 · In Magazzino
The SPD-485-1 is a passive, rugged, industrial-grade, 2-wire RS485 surge protector that can be used to limit the voltage surges and spikes introduced to the RS485 data lines. This industrial RS485 surge protector features 3-stage surge protection – Gas Discharge Tubes (GDT), protection resistors, and Transient Voltage Suppressors (TVS) - for maximum protection. The SPD-485-1 is designed to connect in series to the input of the protected equipment; when a high-voltage surge is introduced into the input, the GDT conducts electric current after becoming ionized, which in turn discharges the high-voltage surge to the earth ground. The excessive voltage will be further clamped to a safe range that the equipment can accept by the TVS. This industrial 2-wire RS485 surge protector features passive circuitry designs and thus requires no external power; it supports data rates up to 10Mbps and can be used
PolyPhaser T1-Data Protector (IX-10L)
Industrial RS485 Surge Suppressor / Protector
Surge Protectors - Protect your RS232 RS485 RS422 Serial Devices
Surge Protectors - Protect your RS232 RS485 RS422 Serial Devices
Surge Protectors - Protect your RS232 RS485 RS422 Serial Devices
rs485 spd, rs485 spd Suppliers and Manufacturers at
Best Buy: Belkin 8-Outlet SurgeMaster II for Satellite TV Systems F5C695-DSS
COMMFRONT Industrial 2-Wire RS485 Surge Protector, Passive, 3-Stage Surge Protection, DIN-Rail Mount : Electronics
The CVT-485_422-1(25) is a 25-pin version, industrial-grade, port-powered RS232 to RS485 / RS232 to RS422 converter, which can be used to convert any
25-pin RS232 to RS485 / RS422 Converter (Industrial / Port-Powered)
RS485 / RS422 Repeater / Extender / Converter (Industrial) – CommFront
MT-RS485 - Surge protection device - 2762265
