4.9 (522) · € 23.50 · In Magazzino
The newest revision of our filament dryer that comes with a large spool expansion kit includes the capacity to dry one 2-4kg spools or two 1kg spools at the same time. It includes a filament drying guide with the proper drying temperature and time for a wide range of filaments on a laminated reference card. Best practice is to dry filament per the guide upon opening, then load the filament in the Materials Management System (MMS), or Polybox if a MMS is not available, or now, in some cases, feed directly from the PrintDry (depending on available feed path), to ensure best quality prints in all materials. This process is required for investment casting pattern material and all nylons. It is also highly recommended for all high performance polymers, you will get better looking, more accurate parts and more reliable
The newest revision of our filament dryer that comes with a large spool expansion kit includes the capacity to dry one 2-4kg spools or two 1kg spools at the same time. It includes a filament drying guide with the proper drying temperature and time for a wide range of filaments on a laminated reference card. Best practice is to dry filament per the guide upon opening, then load the filament in the Materials Management System (MMS), or Polybox if a MMS is not available, or now, in some cases, feed directly from the PrintDry (depending on available feed path), to ensure best quality prints in all materials. This process is required for investment casting pattern material and all nylons. It is also highly recommended for all high performance polymers, you will get better looking, more accurate parts and more reliable printing.
Note: It has been our experience that most filaments, as supplied from the manufacture, are not optimally dried, even those that come in vacuum sealed bags. The time and processes between extrusion and packaging seems to almost always allow materials to become wet before packaging. The dry-and-store process eliminates the risk of printing with subpar materials.
Filament Feeder Motor
Large Spool Kit for PrintDry Filament Dryer PRO/PRO3 for Drying 2-5kg Spools
PrintDry Filament Dryer PRO3 w/ Large Spool Kit
Important Shipping Notes - Ships to the US and Canada only- Cannot be shipped to PO boxes- Drop ships directly from PrintDry, please allow an
Additional Chamber Kit for Filament Dryer Pro, Pro 3 | PrintDry
Dry and feed up to 5 kg filament spool with max 300mm or 12” spool outside diameter.
Large Spool Kit for PrintDry Filament Dryer PRO/PRO3 for Drying 2-5kg spools
SunLu FilaDryer S2 Product – DIY Electronics
Filament Dryer best 3D printing models・55 designs to download・Cults
Polymaker Filament Storage Box for 2x1kg Spools or 3kg Spool - Micro Center
5 Reasons Why You Should Always Dry Your 3D Printing Filament — Modern Makes
MakerBot Method - 3D Printer
Polymaker Polybox - using 1kg and 2.2kg spools for big prints!
Polymaker Polybox - using 1kg and 2.2kg spools for big prints!
PrintDry™ - 3D Printing Filament Dryer and Filament Containers
Dryer PRO - Filament Dryer with Large Spool Expansion Kit
Fixdry High Value 3D Filament 2 Spools Compatible Dryerbox — fixdry